End Mills For Graphite

Due to the graphite material's high abrasiveness, brittleness, graphite chip formation of intermittent influence, in the graphite machining process, the tool surface in the alternating cutting stress and cutting impact, easy to early breakage, rapid wear or even breakage failure, so graphite machining with the tool required to have a high resistance to abrasive particle abrasion and impact resistance.

Specifications of End Mills For Graphite

2(4) Blade Flat Bottomed Graphite Coated Milling Cutter

Standard Length
code		Shank Diameter d	Blade Length l	Total Length L
G-SEM2010	G-SEM4010	1	3	3	38
G-SEM2015	G-SEM4015	1.5	3	4	38
G-SEM2020	G-SEM4020	2	3	6	38
G-SEM2025	G-SEM4025	2.5	3	8	38
G-SEM2030	G-SEM4030	3	3	8	38
G-SEM2040	G-SEM4040	4	4	11	50
G-SEM2050	G-SEM4050	5	5	13	50
G-SEM2060	G-SEM4060	6	6	16	50
G-SEM2080	G-SEM4080	8	8	19	60
G-SEM2100	G-SEM4100	10	10	22	75
G-SEM2120	G-SEM4120	12	12	26	75
G-SEM2140	G-SEM4140	14	14	30	90
G-SEM2160	G-SEM4160	16	16	32	100
G-SEM2180	G-SEM4180	18	18	38	100
G-SEM2200	G-SEM4200	20	20	38	100
Extended Length
code		Blade Diameter D	Shank Diameter d	Blade Length l	Total Length L
G-SEM2010L	G-SEM4010L	1	3	5	60
G-SEM2015L	G-SEM4015L	1.5	3	7.5	60
G-SEM2020L	G-SEM4020L	2	3	10	60
G-SEM2025L	G-SEM4025L	2.5	3	12.5	60
G-SEM2030L	G-SEM4030L	3	3	15	60
G-SEM2040L	G-SEM4040L	4	4	20	80
G-SEM2050L	G-SEM4050L	5	5	25	80
G-SEM2060L	G-SEM4060L	6	6	25	80
G-SEM2080L	G-SEM4080L	8	8	35	90
G-SEM2100L	G-SEM4100L	10	10	45	100
G-SEM2120L	G-SEM4120L	12	12	50	100
G-SEM2160L	G-SEM4160L	16	16	65	150
G-SEM2200L	G-SEM4200L	20	20	70	150

2(4) Edge Ball End Graphite Machining Milling Cutter

Standard Length
code	Blade Diameter D	Shank Diameter d	Blade Length L1	Total Length L	Radius R	Blade Count Z	Excessive cone angle α
G-SBM2020	2	3	10	50	1	2	12°
G-SBM2030	3	3	10	50	1.5	2	-
G-SBM2040	4	4	15	60	2	2	-
G-SBM2050	5	5	20	60	2.5	2	-
G-SBM4060	6	6	30	75	3	4	-
6G-SBM4080	8	8	30	80	4	4	-
G-SBM4100	10	10	30	90	5	4	-
G-SBM4120	12	12	30	100	6	4	-
Extended Length
code	Blade Diameter D	Shank Diameter d	Blade Length L1	Total Length L	Radius R	Blade Count Z	Excessive cone angle α
G-SBM2020L	2	3	5	100	1	2	12°
G-SBM2030L	3	3	15	100	1.5	2	-
G-SBM2040L	4	4	20	100	2	2	-
G-SBM2050L	5	5	25	100	2.5	2	-
G-SBM4060L	6	6	30	100	3	4	-
G-SBM4060XL	8	8	35	150	4	4	-
G-SBM4080L	10	10	40	150	5	4	-
G-SBM4100L	12	12	40	150	6	4	-
G-SBM4120L	2	3	40	150	1	4	-

3(4) Edge Inverted R-Angle Graphite Machining Milling Cutter

Standard Length
code	Blade Diameter D	Shank Diameter d	Blade Length L1	Total Length L	Radius R	Blade Count Z	Excessive cone angle α
G-SEM2020-r01	2	3	10	50	0.1	3	12°
G-SEM2030-r01	3	3	10	50	0.1	3	-
G-SEM2040-r01	4	4	15	60	0.1	4	-
G-SEM2050-r02	5	5	20	60	0.2	4	-
G-SEM4060-r02	6	6	30	75	0.2	4	-
G-SEM4080-r03	8	8	30	80	0.3	4	-
G-SEM4100-r03	10	10	30	90	0.3	4	-
G-SEM4120-r03	12	12	30	100	0.3	4	-
Extended Length
code	Blade Diameter D	Shank Diameter d	Blade Length L1	Total Length L	Radius R	Blade Count Z	Excessive cone angle α
G-SEM2020L-r01	2	3	15	100	0.1	3	12°
G-SEM2030L-r01	3	3	30	100	0.1	3	-
G-SEM2040L-r01	4	4	30	100	0.1	4	-
G-SEM2050L-r02	5	5	35	100	0.2	4	-
G-SEM4060L-r02	6	6	35	100	0.2	4	-
G-SEM4060XL-r02	6	6	40	150	0.2	4	-
G-SEM4080L-r03	8	8	45	150	0.3	4	-
G-SEM4100L-r03	10	10	50	150	0.3	4	-
G-SEM4120L-r03	12	12	50	150	0.3	4	-

2 Blade Flat Bottomed Graphite Coated Milling Cutter

code	Blade Diameter D	Blade Length l	Effective Blade Length L1	Neck Diameter U/C	Total Length L
G-MEM2004-02	0.4	0.6	2	0.38	45
G-MEM2004-04	0.4	0.6	4	0.38	45
G-MEM2005-02	0.5	0.7	2	0.48	45
G-MEM2005-04	0.5	0.7	4	0.48	45
G-MEM2005-06	0.5	0.7	6	0.48	45
G-MEM2006-04	0.6	0.9	4	0.57	45
G-MEM2006-06	0.6	0.9	6	0.57	45
G-MEM2006-08	0.6	0.9	8	0.57	45
G-MEM2008-06	0.8	1.2	6	0.76	45
G-MEM2008-08	0.8	1.2	8	0.76	45
G-MEM2008-10	0.8	1.2	10	0.76	45
G-MEM2010-06	1	1.5	6	0.95	45
G-MEM2010-08	1	1.5	8	0.95	45
G-MEM2010-10	1	1.5	10	0.95	45
G-MEM2010-12	1	1.5	12	0.95	45
G-MEM2012-06	1.2	1.8	6	1.1	45
G-MEM2012-08	1.2	1.8	8	1.1	45
G-MEM2012-10	1.2	1.8	10	1.1	45
G-MEM2014-08	1.4	2.1	8	1.3	45
G-MEM2014-10	1.4	2.1	10	1.3	45
G-MEM2014-12	1.4	2.1	12	1.3	45
G-MEM2015-06	1.5	2.3	6	1.4	45
G-MEM2015-08	1.5	2.3	8	1.4	45
G-MEM2015-10	1.5	2.3	10	1.4	45
G-MEM2015-12	1.5	2.3	12	1.4	45
G-MEM2015-16	1.5	2.3	16	1.4	45
G-MEM2016-10	1.6	2.4	10	1.5	45
G-MEM2016-12	1.6	2.4	12	1.5	45
G-MEM2016-16	1.6	2.4	16	1.5	45
G-MEM2018-10	1.8	2.7	10	1.7	45
G-MEM2018-12	1.8	2.7	12	1.7	45
G-MEM2018-16	1.8	2.7	16	1.7	45
G-MEM2020-08	2	3	8	1.9	45
G-MEM2020-10	2	3	10	1.9	45
G-MEM2020-12	2	3	12	1.9	45
G-MEM2020-14	2	3	14	1.9	45
G-MEM2020-20	2	3	20	1.9	45
G-MEM2022-20	2.2	3.3	20	2.1	45
G-MEM2025-20	2.5	3.8	20	2.4	45

(D4 Fixed Shank) Two Edge Ball Head Graphite Machining Coated Milling Cutter

code	Ball head radius	Blade Diameter D	Blade Length l	Effective Blade Length L1	Neck Diameter U/C	Total Length L
G-MEM2004-02	0.2	0.4	0.6	2	0.38	45
G-MEM2004-04	0.2	0.4	0.6	4	0.38	45
G-MEM2005-02	0.25	0.5	0.7	2	0.48	45
G-MEM2005-04	0.25	0.5	0.7	4	0.48	45
G-MEM2005-06	0.25	0.5	0.7	6	0.48	45
G-MEM2006-04	0.3	0.6	0.9	4	0.57	45
G-MEM2006-06	0.3	0.6	0.9	6	0.57	45
G-MEM2006-08	0.3	0.6	0.9	8	0.57	45
G-MEM2008-06	0.4	0.8	1.2	6	0.76	45
G-MEM2008-08	0.4	0.8	1.2	8	0.76	45
G-MEM2008-10	0.4	0.8	1.2	10	0.76	45
G-MEM2010-06	0.5	1	1.5	6	0.95	45
G-MEM2010-08	0.5	1	1.5	8	0.95	45
G-MEM2010-10	0.5	1	1.5	10	0.95	45
G-MEM2010-12	0.5	1	1.5	12	0.95	45
G-MEM2012-06	0.6	1.2	1.8	6	1.1	45
G-MEM2012-08	0.6	1.2	1.8	8	1.1	45
G-MEM2012-10	0.6	1.2	1.8	10	1.1	45
G-MEM2014-08	0.7	1.4	2.1	8	1.3	45
G-MEM2014-10	0.7	1.4	2.1	10	1.3	45
G-MEM2014-12	0.7	1.4	2.1	12	1.3	45
G-MEM2015-06	0.75	1.5	2.3	6	1.4	45
G-MEM2015-08	0.75	1.5	2.3	8	1.4	45
G-MEM2015-10	0.75	1.5	2.3	10	1.4	45
G-MEM2015-12	0.75	1.5	2.3	12	1.4	45
G-MEM2015-16	0.75	1.5	2.3	16	1.4	45
G-MEM2016-10	0.8	1.6	2.4	10	1.5	45
G-MEM2016-12	0.8	1.6	2.4	12	1.5	45
G-MEM2016-16	0.8	1.6	2.4	16	1.5	45
G-MEM2018-10	0.9	1.8	2.7	10	1.7	45
G-MEM2018-12	0.9	1.8	2.7	12	1.7	45
G-MEM2018-16	0.9	1.8	2.7	16	1.7	45
G-MEM2020-08	1	2	3	8	1.9	45
G-MEM2020-10	1	2	3	10	1.9	45
G-MEM2020-12	1	2	3	12	1.9	45
G-MEM2020-14	1	2	3	14	1.9	45
G-MEM2020-20	1	2	3	20	1.9	45
G-MEM2022-20	1.1	2.2	3.3	20	2.1	45
G-MEM2025-20	1.25	2.5	3.8	20	2.4	45

(D6 Fixed Shank) Two Edge Flat Bottomed Graphite Machining Coated Milling Cutter

code	Blade Diameter D	Blade Length l	Effective Blade Length L1	Neck Diameter U/C	Total Length L
G-MHM2025-12	2.5	3.8	12	2.4	60
G-MHM2025-20	2.5	3.8	20	2.4	60
G-MHM2030-12	3	4.5	12	2.85	60
G-MHM2030-16	3	4.5	16	2.85	60
G-MHM2030-20	3	4.5	20	2.85	60
G-MHM2035-12	3.5	5.2	12	3.3	60
G-MHM2035-16	3.5	5.2	16	3.3	60
G-MHM2035-20	3.5	5.2	20	3.3	60
G-MHM2040-12	4	6	12	3.8	60
G-MHM2040-16	4	6	16	3.8	60
G-MHM2040-20	4	6	20	3.8	60

(D6 Fixed Shank) Two Edge Ball Head Graphite Machining Coated Milling Cutter

code	Blade Diameter D	Blade Length l	Effective Blade Length L1	Neck Diameter U/C	Total Length L
G-MBM2025-12	2.5	3.8	12	2.4	60
G-MBM2025-16	2.5	3.8	16	2.4	60
G-MBM2025-20	2.5	3.8	20	2.4	60
G-MBM2030-12	3	4.5	12	2.85	60
G-MBM2030-16	3	4.5	16	2.85	60
G-MBM2030-20	3	4.5	20	2.85	60
G-MBM2035-12	3.5	5.2	12	3.3	60
G-MBM2035-16	3.5	5.2	16	3.3	60
G-MBM2035-20	3.5	5.2	20	3.3	60
G-MBM2040-12	4	6	12	3.8	60
G-MBM2040-16	4	6	16	3.8	60
G-MBM2040-20	4	6	20	3.8	60