Spiral Face Wave Form End Mills

Suitable for heavy duty cutting. Wave flute end mill is in the ordinary high-speed steel end mill helical front face on the basis of special milling fixtures will be helical front face and then processed into a wave-shaped helical surface, which intersects with the rear face into a wave-shaped cutting edge. The peaks and valleys of the two adjacent wave-shaped edges are staggered along the axis by a certain distance, so that the cutting width is significantly reduced, and the actual cutting thickness of the cutting edge is about three times larger, and the chips cut are narrow and thick, which reduces the degree of cutting deformation and enables the cutting edge to avoid the surface hardening layer and cut into the workpiece.

Specifications of Spiral Face Wave Form End Mills

Spiral carbide face wave form end mill with straight shank/weldon shank/whistle shank

Short flute length,standard flute length
Code			Blade Diameter D	Shank Diameter d	Blade length 1	Total Length L	Chamfer c	Blade count X
CEM×1416FF	CEM×1416FWe	CEM×1416FWs	14	14	16	76	0.5	3
CEM×1620FF	CEM×1620FWe	CEM×1620FWs	16	16	20	80	0.5	3
CEM×1632FF	CEM×1632FWe	CEM×1632FWs	16	16	32	92	0.5	3
CEM×1820FF	CEM×1820FWe	CEM×1820FWs	18	18	20	80	0.5	3
CEM×1832FF	CEM×1832FWe	CEM×1832FWs	18	18	32	92	0.5	3
CEM×2025FF	CEM×2025FWe	CEM×2025FWs	20	20	25	92	0.5	3
CEM×2038FF	CEM×2038FWe	CEM×2038FWs	20	20	38	106	0.5	3
CEM×2225FF	CEM×2225FWe	CEM×2225FWs	22	22	25	92	0.5	3
CEM×2238FF	CEM×2238FWe	CEM×2238FWs	22	22	38	106	0.5	3
CEM×2525FF	CEM×2525FWe	CEM×2525FWs	25	25	25	102	0.5	3, 4
CEM×2550FF	CEM×2550FWe	CEM×2550FWs	25	25	50	126	0.5	3, 4
CEM×2825FF	CEM×2825FWe	CEM×2825FWs	28	32	25	106	0.5	3, 4
CEM×2850FF	CEM×2850FWe	CEM×2850FWs	28	32	50	130	0.5	3, 4
CEM×3025FF	CEM×3025FWe	CEM×3025FWs	30	32	25	106	0.5	3, 4
CEM×3050FF	CEM×3050FWe	CEM×3050FWs	30	32	50	130	0.5	3, 4
CEM×1620FF	CEM×1620FWe	CEM×1620FWs	16	16	20	80	0.5	3
CEM×3232FF	CEM×3232FWe	CEM×3232FWs	32	32	32	112	0.5	3, 4
CEM×3250FF	CEM×3250FWe	CEM×3250FWs	32	32	50	130	0.5	3, 4
CEM×3632FF	CEM×3632FWe	CEM×3632FWs	36	32	32	112	0.5	3, 4
CEM×3650FF	CEM×3650FWe	CEM×3650FWs	36	32	50	130	0.5	3, 4
CEM×4050FF	CEM×4050FWe	CEM×4050FWs	40	40	50	140	0.8	3, 4, 6
CEM×4063FF	CEM×4063FWe	CEM×4063FWs	40	40	63	155	0.8	3, 4, 6
CEM×4550FF	CEM×4550FWe	CEM×4550FWs	45	40	50	142	0.8	3, 4, 6
CEM×4563FF	CEM×4563FWe	CEM×4563FWs	45	40	63	155	0.8	3, 4, 6
CEM×5050FF	CEM×5050FWe	CEM×5050FWs	50	50	50	152	0.8	3, 4, 6
CEM×5075FF	CEM×5075FWe	CEM×5075FWs	50	50	75	177	0.8	3, 4, 6

Long flute length,extended flute length
Code			Blade Diameter D	Shank Diameter d	Blade length 1	Total Length L	Chamfer c	Blade count X
CEM×1425FF	CEM×1425FWe	CEM×1425FWs	14	14	25	85	0.5	3
CEM×1650FF	CEM×1650FWe	CEM×1650FWs	16	16	50	110	0.5	3
CEM×1663FF	CEM×1663FWe	CEM×1663FWs	16	16	63	125	0.5	3
CEM×1850FF	CEM×1850FWe	CEM×1850FWs	18	18	50	110	0.5	3
CEM×1863FF	CEM×1863FWe	CEM×1863FWs	18	18	63	125	0.5	3
CEM×2063FF	CEM×2063FWe	CEM×2063FWs	20	20	63	129	0.5	3
CEM×2075FF	CEM×2075FWe	CEM×2075FWs	20	20	75	141	0.5	3
CEM×2263FF	CEM×2263FWe	CEM×2263FWs	22	22	63	129	0.5	3
CEM×2275FF	CEM×2275FWe	CEM×2275FWs	22	22	75	141	0.5	3
CEM×2575FF	CEM×2575FWe	CEM×2575FWs	25	25	75	151	0.5	3, 4
CEM×25100FF	CEM×25100FWe	CEM×25100FWs	25	25	100	176	0.5	3, 4
CEM×2875FF	CEM×2875FWe	CEM×2875FWs	28	32	75	155	0.5	3, 4
CEM×28100FF	CEM×28100FWe	CEM×28100FWs	28	32	100	180	0.5	3, 4
CEM×3075FF	CEM×3075FWe	CEM×3075FWs	30	32	75	155	0.5	3, 4
CEM×30100FF	CEM×30100FWe	CEM×30100FWs	30	32	100	180	0.5	3, 4
CEM×3275FF	CEM×3275FWe	CEM×3275FWs	32	32	75	155	0.5	3, 4
CEM×32120FF	CEM×32120FWe	CEM×32120FWs	32	32	120	200	0.5	3, 4
CEM×3675FF	CEM×3675FWe	CEM×3675FWs	36	32	75	155	0.5	3, 4
CEM×36120FF	CEM×36120FWe	CEM×36120FWs	36	32	120	200	0.5	3, 4
CEM×4090FF	CEM×4090FWe	CEM×4090FWs	40	40	90	182	0.8	3, 4, 6
CEM×40150FF	CEM×40150FWe	CEM×40150FWs	40	40	150	242	0.8	3, 4, 6
CEM×50100FF	CEM×50100FWe	CEM×50100FWs	50	50	100	202	0.8	3, 4, 6
CEM×50250FF	CEM×50250FWe	CEM×50250FWs	50	50	250	352	0.8	3, 4, 6

Spiral carbide ball nose end mill with morse taper shank

Short flute length,standard flute length
Code	Blade Diameter D	Shank Diameter d	Blade length 1	Total Length L	Chamfer c	Blade count X
CEM×1632FM2	16	16	32	117	0.5	3
CEM×1832FM2	18	18	32	117	0.5	3
CEM×2038FM2	20	20	38	123	0.5	3
CEM×2238FM3	22	22	38	140	0.5	3
CEM×2545FM3	25	25	26	128	0.5	3, 4
CEM×2826FM3	28	32	26	128	0.5	3, 4
CEM×2845FM3	28	32	45	152	0.5	3, 4
CEM×3026FM4	30	32	26	151	0.5	3, 4
CEM×3045FM4	30	32	45	175	0.5	3, 4
CEM×3232FM4	32	32	32	157	0.5	3, 4
CEM×3253FM4	32	32	53	175	0.5	3, 4
CEM×3632FM4	36	32	32	157	0.5	3, 4
CEM×3653FM4	36	32	53	175	0.5	3, 4
CEM×4038FM4	40	40	38	163	0.8	3, 4, 6
CEM×4063FM4	40	40	63	188	0.8	3, 4, 6
CEM×4538FM5	45	40	38	206	0.8	3, 4, 6
CEM×4563FM5	45	40	63	221	0.8	3, 4, 6
CEM×5038FM5	50	50	38	203	0.8	3, 4, 6
CEM×5075FM5	50	50	75	228	0.8	3, 4, 6
CEM×6363FM5	63	63	63	224	0.8	3, 4, 6
CEM×6390FM5	63	63	90	248	0.8	3, 4, 6

Long flute length,extended flute length
Code	Blade Diameter D	Shank Diameter d	Blade length 1	Total Length L	Chamfer c	Blade count X
CEM×1650FM2	16	2#	50	135	0.5	3
CEM×1663FM2	16	2#	63	148	0.5	3
CEM×1850FM2	18	2#	50	135	0.5	3
CEM×1863FM2	18	2#	63	148	0.5	3
CEM×2063FM2	20	2#	63	148	0.5	3
CEM×2075FM2	20	2#	75	160	0.5	3
CEM×2263FM3	22	3#	63	165	0.5	3
CEM×2275FM3	22	3#	75	177	0.5	3
CEM×2575FM3	25	3#	75	177	0.5	3, 4
CEM×25100FM3	25	3#	100	202	0.5	3, 4
CEM×2875FM3	28	3#	75	177	0.5	3, 4
CEM×28100FM3	28	3#	100	202	0.5	3, 4
CEM×3075FM4	30	4#	75	200	0.5	3, 4
CEM×30100FM4	30	4#	100	225	0.5	3, 4
CEM×3275FM4	32	4#	75	200	0.5	3, 4
CEM×32120FM4	32	4#	120	245	0.5	3, 4
CEM×3675FM4	36	4#	75	200	0.5	3, 4
CEM×36120FM4	36	4#	120	245	0.5	3, 4
CEM×4090FM4	40	4#	90	215	0.8	3, 4, 6
CEM×40150FM4	40	4#	150	275	0.8	3, 4, 6
CEM×4590FM5	45	5#	90	248	0.8	3, 4, 6
CEM×45150FM5	45	5#	150	308	0.8	3, 4, 6
CEM×50100FM5	50	5#	100	253	0.8	3, 4, 6
CEM×50250FM5	50	5#	250	403	0.8	3, 4, 6
CEM×63150FM5	63	5#	150	308	0.8	3, 4, 6
CEM×63250FM5	63	5#	250	408	0.8	3, 4, 6

Milling Tools

Drilling Tools

Reaming Tools

Boring Tools

Spiral Face Wave Form End Mills

Specifications of Spiral Face Wave Form End Mills

Spiral carbide face wave form end mill with straight shank/weldon shank/whistle shank

Spiral carbide ball nose end mill with morse taper shank

Relate Brazed Carbide End Mills (Straight Shank/Weldon Shank/Whistle Shank)